2R63 Recycling Baler

Plastic Recycling Equipment, Plastic Baler, Plastic Balers Save time and money with a complete turn-key baling solution. The 2R63 two-ram, auto-tie baler chassis utilizes the same interlocking designs found in larger Excel two-ram balers, while remaining very economical. This baler bales plastic extremely well.

The 2R63 is constructed of four solid steel sheets (top, bottom, and both sides), providing seamless construction from end to end. We are a industrial baler manufacturer and work to combine this innovative engineering with our use of only the highest quality components. The result is the very best durability and function for your plastic recycling equipment.

Features
Specifications
Literature
Applications
Video
Photos

Standard Features: 2R63 Series Baler

The 2R63 baler is manufactured standard with either left-hand or right-hand eject
U.S. Wire Tie Systems Automatic 13 Gauge Wire Tier, Model 343
20 HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
29 Second Main Ram Dry Cycle Time
Short Stroke Selector Reduces Cycle Time to 21 Seconds
Remote Operating Control Located on Pedestal
Percent of Bale Complete Indicator Lights
Automatic Bale Sizing System
Full Platen Penetration
Complete with MV32 Hydraulic Oil
NEMA 12 rated Enclosures and Controls
Power Unit Mounted on back of the Machine for Space Savings
Air/Oil Heat Exchanger
One Spool of 13 Gauge Ultra High Tensile Galvanized Wire
Paint - Excel Blue
Standard Hopper
Lower Photo Eye
UL, CUL, CE Approved
Available with an Excel above ground or in-ground conveyer for a turn-key system

General Specifications

	Two-Ram Model 2R63 AUTOMATIC BALING PRESS
Structural
Height	62” (158cm) Loading 52.5” (135cm) Frame
Length	16’ 2” (493cm)
Width	16’ 11” (516cm)
Chamber	60” (153cm)W x 29.5” (75cm)H
Feed Opening	54” (138cm)W x 40” (102cm)L
Shipping weight	32,730 lbs. (14,846kg) (as shown)
Performance Data
Main cylinder	2 - 6” (15cm) Bore x 74” (188cm) Stroke x 4” (10cm) Hard Chrome Rod
Eject cylinder	6” (15cm) Bore x 66” (168cm) Stroke x 3.5” (9cm) Hard Chrome Rod
Oil reserver	105 gal. (399 liters)
Independent pumps	34 Gal. (130 liters) Pressure Compensated Horse Power Limited Piston Pump
Motors	20 HP TEFC 230-460 V 3 PHASE
System pressure	3,000 PSI Automatic Mode (3,250 Maximum)
Overall platen force	159,467 lbs.
Platen PSI	95 PSI
Cycle time	29 Seconds - 21 Sec. Short Stroke
Estimated bale size	60”L x 48”W x 30”H (152cm L x 122cm W x 76cm H)
Directional Valve	Hi-Flow Cushion Shift Design
Enclosure	NEMA 12 RATED
Controls	UL/CSA/CE Approved NEMA 12 Rated
Bale Weights *
OCC	1,200 lbs. (544kg) 4.2 TPH
Magazines	2,000 lbs. (907kg) 9.4 TPH
Newspaper	1,500 lbs. (680kg) 8.0 TPH
Office paper	1,600 lbs. (726kg) 8.0 TPH
HDPE	1,100 lbs. (499kg) 3.3 TPH
PET	800 lbs. (363kg) 2.1 TPH (May vary with percent of capped bottles)
Aluminum cans	625 lbs. (284kg) 3.0 TPH
Tin cans	1,200 lbs. (544kg) 5.6 TPH
Features
	Automatic Tie System Bale Discharge Table Lower Photo eyes Full Platen Penetration Short Stroke Selector Hour Meter Interlocking Construction	Air to Oil Cooler Regenative Circuit Bale Release Door Replaceable Hardox Wear Liners Percent of Bale Complete Indicator Lights (50%, 75%, 100%)

* Bale Weights are based on actual customer surveys, and may differ with moisture content, material density, etc. * To provide our customers with the best possible equipment and offer the latest in product improvements, these specifications are subject to change without notice, and without incurring responsibility to units previously sold.