2R9 & 2R10 Series Two Ram Baler

There's a reason our two ram balers are known for their outstanding two ram baler functionality and quality.

Two Ram Balers, 2 Ram Balers, Two Ram Baler, 2 Ram Baler Excel couples these 2 ram balers with interlocking construction and the most advanced control system in the industry for an indestructible, automated 2 ram baler. Our design for automated operation eliminates the need for a full-time operator. This superior quality means reduced down time, automatic two ram operation and dramatic labor savings.

Features
Specifications
Literature
Applications
Videos
Photos

Standard Features: 2R9 & 2R10 Series Two Ram Balers

The 2R9 & 2R10 balers are manufactured standard with either left-hand or right-hand eject.
Operator-Free Operation
50HP TEFC Motor, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase (2 - 50 HP, 2R10)
Excel Autonetics™ - Absolute Ram Position Sensor with Electronic Display
U.S. Wire Tie Systems Automatic 342 Tier with Turbo Motor
Industrial Hardened Logic Controller
Fully Lined with Hardox® 400 Replaceable Wear Liners
300 Gallon Hydraulic Reservoir with Regenerative Circuit (600 gallon 2R10)
One Year Excel Limited Warranty (Parts & Labor)
Upper and Lower Photo Eyes (sender/receiver upper photo eye with integrated conveyer control)
NEMA 12 rated Enclosures and Controls with Conveyer Starter
Installed and Working Modem for On-Line Diagnostics
Castle Key Safety Interlocking Entry System
Bale Chamber Penetration (2R9 baler is 27") (2R10 baler is 24")
Automatic Bale Release Door
Bale Discharge Platform
One Spool of 12 Gauge Ultra High Tensile Galvanized Wire
Paint - Excel Blue
Air to Oil Heat Exchanger
Integrated Steel Platen Wiper
UL, CUL, CE Approved
Bale Counter
Hardened, Serrated, Turntable Cutting Knives
Hour Meter
9" eject cylinder
Separation Door for Solid Waste and Scrap Applications (Available Option)
Available with Excel integrated conveyers with rubber or steel belts for a turn-key system

General Specifications

	2R9	2R10
Structural	Overall dimensions and shipping weight may vary with options
Overall Length	28’7” (8.75 meters) w/stairs)	33’10” feet (10.09 meters) w/stairs
Overall Width	13’3” (4.05 meters)	13’5” (4.11 meters)
Overall Height	8’8” (2.68 meters)	8’8” (2.68 meters)
Feed opening	40”W x 65”L (102cm x 165cm)	40”W x 90”L (102cm x 229cm)
Chamber floor	3/4” Thick Plate plus 3/8” Hardox 400 Liner	1” Thick Plate plus 3/8” Hardox 400 Liner
Chamber sidewalls	3/4” Plate plus 3/8” Hardox 400 Liner	3/4” Plate plus 3/8” Hardox 400 Liner
Shipping weight (approximate)	47,500 lbs (21,545kg) (with bale separation door)	58,000 lbs (26,308kg) (with bale separation door)
Performance Data
Main cylinder	9”(22.9cm) bore x 106” (269cm) stroke 6”(15.2cm) hardened chrome rod	10”(25.4cm) bore x 130” (330cm) stroke 7”(17.8cm) hardened chrome rod
Eject cylinder	9”(22.9cm) bore - 6”(15.2cm) chrome rod	9”(22.9cm) bore - 6”(15.2cm) chrome rod
Oil reserver	300 gallons (1,137 liters)	600 gallons (2,273 liters)
Independent pumps	100 GPM (379 liters)	200 GPM (758 liters)
Motors	50 HP TEFC 460V, 3 Phase	2-50 HP, TEFC, 460V, 3 Phase
System pressure	3,000 PSI Automatic Mode (3,250 PSI Maximum)	3,000 PSI Automatic Mode (3,250 PSI Maximum)
Overall platen force	190,851 lbs. / 206,756 lbs. Maximum	235,619 lbs. / 255,254 lbs. Maximum
Platen face PSI	154 PSI / 166 PSI Maximum	190 PSI / 205 PSI Maximum
Cycle time	20 seconds	16 seconds
Estimated bale size (adjustable)	60”L X 45”W X 30”H (152cm x 114cm x 76cm) 46.88 cu.ft. (1.33m3)	60”L x 45”W x 30”H (152cm x 114cm x 76cm) 46.88 cu.ft. (1.33 m3)
Bale Weights *
OCC	1,400 lbs (635kg) 8 TPH	1,500 lbs (680kg) 15 TPH
Magazines	2,400 lbs (1,088kg) 20 TPH	2,400 lbs (1,087kg) 25 TPH
Newspaper	1,600 lbs (726kg) 15 TPH	1,700 lbs (771kg) 25 TPH
HDPE plastics	1,300 lbs (589kg) 5 TPH	1,350 lbs (612kg) 8 TPH
PET plastics	1,200 lbs (544kg) 6 TPH	1,325 lbs (601kg) 9 TPH
Solid waste	2,000 lbs (907kg) 15 TPH	2,200 lbs (997kg) 25 TPH
Aluminum cans	800 lbs (362kg) 6 TPH	1,000 lbs (453kg) 9 TPH
Tin cans	2,000 lbs (907kg) 15 TPH	2,200 lbs (998kg) 20 TPH
Aluminum extrusions	1,400 lbs (635kg) 6 TPH	1,500 lbs (680kg) 9 TPH
Painted aluminum siding	2,000 lbs (907kg) 7.5 TPH	2,200 lbs (998kg) 11.5 TPH
Radiators	1,800 lbs (816kg) 8 TPH	2,000 lbs (907kg) 12 TPH
Insulated copper wire	3,500 lbs (1,587kg) 15 TPH	3,700 lbs (1,678kg) 22 TPH
Misc. non-ferrous scrap	1,500 lbs (680kg) 6 TPH	1,700 lbs (771kg) 10 TPH

* Bale Weights are based on actual customer surveys, and may differ with moisture content, material density, etc. * To provide our customers with the best possible equipment and offer the latest in product improvements, these specifications are subject to change without notice, and without incurring responsibility to units previously sold.