EX62 & EX63 Series Paper Baler

Paper Baler, Paper Recycling Balers, Paper Recycling Machine In addition to functioning as great paper balers, the Excel EX62 & EX63 balers are designed to perform as paper recycling balers, cardboard balers, newspaper balers, aluminum can balers, tin can balers, PET balers, and HDPE balers. These recycling machines operate extremely well as recycling balers for paper and many different recyclable products.

These balers are paper recycling machines and produce the best mill-sized bales in the baling industry without preconditioning. Excel uses only the highest quality baler components available for ultimate performance and baler reliability.

The EX63 baler is also available with a large feed opening, ideal for baling cardboard boxes or foam. Learn more about the EX63F large feed opening baler.

Features
Specifications
Literature
Applications
Video
Photos

Standard Features: EX62 & EX63 Series Balers

Hydraulic Door Latch (EX63 baler only)
Regenerative Circuit (EX63 baler only) Reduces cycle time by 17 seconds
The EX62 baler is manufactured standard with either left-hand or right-hand door swing
20 HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
Horsepower limited Pressure Compensated Piston Pump
Removable Shear Blade with Four Cutting edges
Six Fully Guided Wire Tie Slots
Automatic Bale Sizing System
Automatic Shear Jam Correction
Short Stroke Feature to Reduce Cycle Time
Excel’s 1-2-3 Warranty (1 Year Labor, 2 Year Parts, 3 Year Structural & Cylinder) (U.S.A. only)
Complete with MV32 Hydraulic Oil
NEMA 12 rated Enclosures and Controls
Remote Controls - According to Door Swing
Safety Interlock Door with Decompression
Clean-out Tool, Grease Gun, and Extra Touch-up Paint
One Bundle of 12 x 13 Single Loop Wire Ties
Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
Standard Hopper
Lower Photo Eye
UL, CUL Approved (CE Available)
PLC Controlled Operation
Available with an Excel above ground or in-ground conveyer for a turn-key system

General Specifications

	Excel Model EX62 AUTOMATIC CLOSED END BALING PRESS	Excel Model EX63 AUTOMATIC CLOSED END BALING PRESS
Structural
Height	62” Loading 52 1/2” Frame (158cm)	62” Loading 52 1/2” Frame (158cm)
Length	179” (455cm)	179” (455cm)
Width	77” (196cm)	77” (196cm)
Chamber	47”L (119cm) x 60”W (152cm) x 30”H (76cm)	47”L (119cm) x 60”W (152cm) x 30”H (76cm)
Feed opening	54”W (137cm) x 35”L (89cm)	54”W (137cm) x 35”L (89cm)
Baler shipping weight	18,760 lbs. (8,509kg) (as shown)	18,960 lbs. (8,600kg) (as shown)
Performance Data
Pump	34 gal. (130 liters) Pressure Compensated Horse Power Limited Piston Pump, 4,000 PSI Rated	34 gal. (130 liters) Pressure Compensated Horse Power Limited Piston Pump, 4,000 PSI Rated
Directional valve	D08 Pattern, Hi-Flow Cushion Shift Design	D08 Pattern, Hi-Flow Cushion Shift Design
Cylinders	(2) 6” (15cm) Bore x 74” (188cm) Stroke x 4” (10cm) Hard Chrome Rod	(2) 6” (15cm) Bore x 74” (188cm) Stroke x 4” (10cm) Hard Chrome Rod
Oil reservoir	105 gal. (399 liters)	105 gal. (399 liters)
Door Latch Cyl.	N/A	4” (10cm) Bore x 6” (15cm) Stroke x 2” (5cm) Rod
Motor	TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase	TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
Enclosure	NEMA 12 Rated, UL Approved	NEMA 12 Rated, UL Approved
Controls	UL/CUL/CE Approved, NEMA 12 Rated	UL/CUL/CE Approved, NEMA 12 Rated
Hyd System Pressure	3,000 PSI (207 BAR)	3,000 PSI (207 BAR)
Overall Platen force	159,400 lbs. (72 tonne)	159,400 lbs. (72 tonne)
Platen PSI	92 PSI (6.33 BAR)	92 PSI (6.33 BAR)
Cycle time	46 sec. - 30 sec. Short Stroke	29 sec. - 21 sec. Short Stroke
Target bale size	60”L (152cm) x 48”W (122cm) x 30”H (76cm)	60”L (152cm) x 48”W (122cm) x 30”H (76cm)
Bale Weights *
OCC	1,200 lbs. (544kg) TPH 2.4	1,200 lbs. (544kg) TPH 3.3
MAGAZINES	2,000 lbs. (907kg) TPH 5	2,000 lbs. (907kg) TPH 7.5
NEWSPAPER	1,500 lbs. (680kg) TPH 4.5	1,500 lbs. (680kg) TPH 6.4
OFFICE PAPER	1,600 lbs. (726kg) TPH 4.8	1,600 lbs. (726kg) TPH 6.8
HDPE	1,100 lbs. (499kg) TPH 1.7	1,100 lbs. (499kg) TPH 2.3
PET	800 lbs. (363kg) TPH 1.1 (May vary with percent of capped bottles)	800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
ALUMINUM CANS	625 lbs. (284kg) TPH 1.9	625 lbs. (284kg) TPH 2.3
TIN CANS	1,200 lbs. (544kg) TPH 3	1,200 lbs. (544kg) TPH 4.5
Features
	Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces

* Bale Weights are based on actual customer surveys, and may differ with moisture content, material density, etc. * To provide our customers with the best possible equipment and offer the latest in product improvements, these specifications are subject to change without notice, and without incurring responsibility to units previously sold.

Buyer Tip:

It’s easy for any baler manufacture to inflate the specifications of a product, in order to differentiate themselves from a competitor, so be very cautious how much weight you put in a competitor's spec sheet. Never let a spec sheet take the place of a in-person visit to another facility baling the model you are considering. Remember, it's not the spec sheet you're buying!