EX63F Foam and Box Baler

Ideal for baling foam And large boxes

The EX63F is ideal for baling foam and leads among box balers! With all the power of the EX63, but engineered with a large feed opening, the EX63F has the flexibility to bale a wide variety of foam, cardboard boxes, and other materials that require a large hopper. The EX63F bales foam with ease and is the best of our box balers.

Ask an Excel Rep to set up a demo to bale your specific material.

Features
Specifications
Literature
Applications
Video
Photos

Standard Features: EX63F Foam / Large Feed Opening Baler

Hydraulic Door Latch
Regenerative Circuit - Reduces cycle time by 17 seconds
20 HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
Horsepower limited Pressure Compensated Piston Pump
Removable Shear Blade with Four Cutting edges
Six Fully Guided Wire Tie Slots
Automatic Bale Sizing System
Automatic Shear Jam Correction
Short Stroke Feature to Reduce Cycle Time
Excel’s 1-2-3 Warranty (1 Year Labor, 2 Year Parts, 3 Year Structural & Cylinder) (U.S.A. only)
Complete with MV32 Hydraulic Oil
NEMA 12 rated Enclosures and Controls
Remote Controls - According to Door Swing
Safety Interlock Door with Decompression
Clean-out Tool, Grease Gun, and Extra Touch-up Paint
One Bundle of 12 x 13 Single Loop Wire Ties
Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
Large Hopper - Feed opening twice the size of the standard EX63
Lower Photo Eye
UL, CUL Approved (CE Available)
PLC Controlled Operation
Available with an Excel above ground or in-ground conveyer for a turn-key system

General Specifications

	Model EX63F - Large Feed Opening Automatic Closed End Baling Press
Structural
Height	100 1/2 " Loading
Length	283"
Width	78 5/8"
Chamber
Feed opening	70"L x 54 1/2" W
Shipping weight	20,000
Performance Data
Pump	34 gal. (130 Liters) Pressure Compensated Horse Power Limited Piston Pump 4,000 PSI Rated
Directional valve	D08 Pattern, High Flow Cushion Shift
Cylinders	(2) 6" (15cm) Bore x 124"
Oil reservoir	105 gal. (399 Liters)
Door latch cyl.
Motor	20 HP TEFC
Enclosure
Controls
HYD System Pressure	3,000 PSI
Overall platen force	159,000 Lbs.
Platen PSI	92 PSI
Cycle time
Target bale size	60"L x 48"W x 30"H
Bale Weights *
Foam	1,200-1,600 lbs.

* Bale Weights are based on actual customer surveys, and may differ with moisture content, material density, etc. * To provide our customers with the best possible equipment and offer the latest in product improvements, these specifications are subject to change without notice, and without incurring responsibility to units previously sold.

Buyer Tip:

It’s easy for any baler manufacture to inflate the specifications of a product, in order to differentiate themselves from a competitor, so be very cautious how much weight you put in a competitor's spec sheet. Never let a spec sheet take the place of a in-person visit to another facility baling the model you are considering. Remember, it's not the spec sheet you're buying!