EX66 & EX77 Series Cardboard Balers
The Excel models EX66 & EX77 balers are an excellent cardboard baler solution. These balers can be cardboard balers and balers of many different materials. They are designed to be the most durable, efficient, and productive closed-end single ram baler in the industry.
With Excel’s innovative, patented, vertical lifting door, the EX66 & EX77 balers distinguish themselves as the most dependable, practical and universal box balers ever built in this class of balers. Those with cardboard baler needs should give us a call to learn about our cardboard baler prices.
Standard Features: EX66 & EX77 Series Balers
- (2) 6" (15.24 cm) Cylinders (EX66 baler only)
- (2) 6.5" (16.51 cm) Cylinders (EX77 baler only)
- Non-Ferrous Hopper (EX77 baler only)
- Remote Controls on Pedestal (EX77 baler only)
- Hardox® 400 Replaceable Wear Liners
- The EX66 & EX77 balers are manufactured standard with a patented, hydraulic, vertical lifting door
- 20 HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
- Horsepower Limited Pressure Compensated Piston Pump
- Removable, Turnable Serrated Shear Blade with 32 Cutting Points
- Five Fully Guided Wire Tie Slots
- Automatic Shear Jam Correction
- Automatic Bale Sizing System
- Short Stroke Feature to Reduce Cycle Time
- 29 Second Dry Cycle Time/21 Time Short Stroke (EX66 baler only)
- Excel’s 1-2-3 Warranty (1 Year Labor, 2 Years Parts, and 3 Years Structural and Cylinder) (EX66 baler only)(U.S.A. only)
- 1 Year Parts and Labor (EX77 baler)
- Complete with MV32 Hydraulic Oil
- NEMA 12 rated Closures and Controls
- Full Bale Ejection
- Full Platen Penetration
- Clean-out Tool and Extra Touch-up Paint
- One Bundle of 12 x 13 Single Loop Wire Ties
- Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
- Standard Hopper
- Lower Photo Eye
- UL, CUL Approved (CE Available)
- PLC Controlled Operation
- Available with an Excel above ground or in-ground conveyer for a turn-key system
General Specifications
Excel Model EX66 Automatic Closed End |
Excel Model EX77 Automatic Closed End |
|
| Structural | ||
| Height | 84” (214cm) | 84” (214cm) |
| Length | 186” (475cm) | 186” (475cm) |
| Width | 88” (224cm) | 88” (224cm) |
| Chamber | 45”L (112.5cm) x 60”W (152cm) x 30”H (76cm) | 45”L (112.5cm) x 60”W (152cm) x 30”H (76cm) |
| Feed opening | 54”W (137cm) x 35”L (89cm) | 54”W (137cm) x 35”L (89cm) |
| Wear liners | 1/4” Hardox 400 Chamber Liner | |
| Shipping weight | 23,260 lbs (10,550kg) (as shown) | 24,860 lbs. (11,276kg) (as shown) |
| Performance Data | ||
| Main cylinder | (2) 6” (15cm) Bore x 74” (188cm) Stroke x 4” (10cm) Hard Chrome Rod |
(2) 6.5” (16.5cm) Bore x 74” (188cm) Stroke x 4.5” (11.5cm) Hard Chrome Rod |
| Eject cylinder | ||
| Oil reservoir | 105 Gal. (399 liters) | 105 Gal. (399 liters) |
| Pump | 34 gal. (130 liters) Pressure Compensated Horse Power Limited Piston Pump, 4,000 PSI Rated |
34 gal. (130 liters) Pressure Compensated Horse Power Limited Piston Pump, 4,000 PSI Rated |
| Motors | 20 HP TEFC 230-460 Volt, 3 Phase | 20 HP TEFC 230-460 Volt, 3 Phase |
| System pressure | 3,000 PSI Automatic Mode (3,250 Maximum) | 3,000 PSI Automatic Mode (3,250 Maximum) |
| Overall platen force | 159,467 lbs. | 187,153 lbs. |
| Platen PSI | 94 PSI | 110 PSI |
| Cycle time | 29 Sec. - 21 Sec. Short Stroke | 34 sec. - 26 sec. Short Stroke |
| Estimated bale size | 60”L (152cm) x 45”W (122cm) x 30”H (76cm) | 60”L (152cm) x 45”W (122cm) x 30”H (76cm) |
| Directional valve | D08 Pattern, Hi-Flow Cushion Shift Design | D08 Pattern, Hi-Flow Cushion Shift Design |
| Vertical door cly. | (2) 3” (7.5cm) Bore x 42” (105cm) Stroke x 2” (5.1cm) Rod |
(2) 4” (7.5cm) Bore x 42” (105cm) Cylinders Stroke x 2.25” (5.65cm) Rod |
| Enclosure | NEMA 12 Rated, UL Approved | NEMA 12 Rated |
| Controls | UL/CUL/CE Approved, NEMA 12 Rated | UL/CUL/CE Approved, NEMA 12 Rated |
| Bale Weights * | ||
| OCC | 1,200 lbs. (544kg) 3.3 TPH | 1,300 lbs. (590kg) 3.3 TPH |
| Magazines | 2,000 lbs. (907kg) 7.5 TPH | 2,300 lbs. (1042kg) 7.5 TPH |
| Newspaper | 1,500 lbs. (680kg) 6.4 TPH | 1,600 lbs. (726kg) 6.4 TPH |
| Office paper | 1,600 lbs. (726kg) 6.8 TPH | 1,700 lbs. (771kg) 6.8 TPH |
| HDPE | 1,100 lbs. (499kg) 2.3 TPH | 1,225 lbs. (556kg) 2.3 TPH |
| PET | 750 lbs. (340kg) 1.2 TPH (May vary with percent of capped bottles) | 800 lbs. (363kg) 1.3 TPH (May vary with percent of capped bottles) |
| Aluminum cans | 625 lbs. (284kg) 2.3 TPH | 750 lbs. (340kg) 2.3 TPH |
| Tin cans | 1,200 lbs. (544kg) 4.5 TPH | 1,600 lbs. (724kg) 4.5 TPH |
| Aluminum extrusions | N/A | 900 lbs. (408kg) 1.35 TPH |
| Painted aluminum siding | N/A | 1,300 lbs (590kg) 2.3 TPH |
| Radiators | N/A | 1,300 lbs (590kg) 2.6 TPH |
| Insulated copper wire | N/A | 3,300 lbs. (1496kg) 6.6 TPH |
Buyer Tip:
It’s easy for any baler manufacture to inflate the specifications of a product, in order to differentiate themselves from a competitor, so be very cautious how much weight you put in a competitor's spec sheet. Never let a spec sheet take the place of a in-person visit to another facility baling the model you are considering. Remember, it's not the spec sheet you're buying!
Model EX66 & EX77 Balers Brochure
The Excel EX66 & EX77 Series Balers bale the following materials:
- Office Paper
- Newspaper
- OCC
- Magazines
- PET
- HDPE
- Aluminum Cans
- Tin Cans
- Plastic Film
- Carpet Padding
- Textiles
EX77 also bales:
- Aluminum siding
- Tin
- Insulated Wire
- Radiators
- Other Light Non-Ferrous Materials
