2R63 Recycling Baler

Excel_web_Thin

Plastic Recycling Equipment, Plastic Baler, Plastic BalersSave time and money with a complete turn-key baling solution. The 2R63 two-ram, auto-tie baler chassis utilizes the same interlocking designs found in larger Excel two-ram balers, while remaining very economical. This baler bales plastic extremely well.

The 2R63 is constructed of four solid steel sheets (top, bottom, and both sides), providing seamless construction from end to end. We are a industrial baler manufacturer and work to combine this innovative engineering with our use of only the highest quality components. The result is the very best durability and function for your plastic recycling equipment.

Standard Features: 2R63 Series Baler

  • The 2R63 baler is manufactured standard with either left-hand or right-hand eject
  • U.S. Wire Tie Systems Automatic 13 Gauge Wire Tier, Model 343
  • 20 HP TEFC Motor, Standard Voltage – 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • 29 Second Main Ram Dry Cycle Time
  • Short Stroke Selector Reduces Cycle Time to 21 Seconds
  • Remote Operating Control Located on Pedestal
  • Percent of Bale Complete Indicator Lights
  • Automatic Bale Sizing System
  • Full Platen Penetration
  • Complete with MV32 Hydraulic Oil
  • NEMA 12 rated Enclosures and Controls
  • Power Unit Mounted on back of the Machine for Space Savings
  • Air/Oil Heat Exchanger
  • One Spool of 13 Gauge Ultra High Tensile Galvanized Wire
  • Paint – Excel Blue
  • Standard Hopper
  • Lower Photo Eye
  • UL, CUL, CE Approved
  • Available with an Excel above ground or in-ground conveyer for a turn-key system

General Specifications

 

Two-Ram Model 2R63

AUTOMATIC BALING PRESS

Structural  
Height 62” (158cm) Loading 52.5” (135cm) Frame
Length 16’ 2” (493cm)
Width 16’ 11” (516cm)
Chamber 60” (153cm)W x 29.5” (75cm)H
Feed Opening 54” (138cm)W x 40” (102cm)L
Shipping weight 32,730 lbs. (14,846kg) (as shown)
Performance Data  
Main cylinder 2 – 6” (15cm) Bore x 74” (188cm) Stroke x 4” (10cm) Hard Chrome Rod
Eject cylinder 6” (15cm) Bore x 66” (168cm) Stroke x 3.5” (9cm) Hard Chrome Rod
Oil reserver 105 gal. (399 liters)
Independent pumps 34 Gal. (130 liters) Pressure Compensated Horse Power Limited Piston Pump
Motors 20 HP TEFC 230-460 V 3 PHASE
System pressure 3,000 PSI Automatic Mode (3,250 Maximum)
Overall platen force 159,467 lbs.
Platen PSI 95 PSI
Cycle time 29 Seconds – 21 Sec. Short Stroke
Estimated bale size 60”L x 48”W x 30”H (152cm L x 122cm W x 76cm H)
Directional Valve Hi-Flow Cushion Shift Design
Enclosure NEMA 12 RATED
Controls UL/CSA/CE Approved NEMA 12 Rated
Bale Weights *  
OCC 1,200 lbs. (544kg) 4.2 TPH
Magazines 2,000 lbs. (907kg) 9.4 TPH
Newspaper 1,500 lbs. (680kg) 8.0 TPH
Office paper 1,600 lbs. (726kg) 8.0 TPH
HDPE 1,100 lbs. (499kg) 3.3 TPH
PET 800 lbs. (363kg) 2.1 TPH (May vary with percent of capped bottles)
Aluminum cans 625 lbs. (284kg) 3.0 TPH
Tin cans 1,200 lbs. (544kg) 5.6 TPH
Features  
  Automatic Tie SystemBale Discharge TableLower Photo eyesFull Platen PenetrationShort Stroke SelectorHour Meter

 

 

Interlocking Construction

 

Air to Oil CoolerRegenative CircuitBale Release DoorReplaceable Hardox Wear LinersPercent of Bale Complete Indicator Lights (50%, 75%, 100%)
     

Download product literature:

Model 2R63 Brochure (PDF)

The Excel 2R63 Series balers can be used for the following materials:

  • Office Paper
  • Newspaper
  • OCC
  • Magazines
  • PET
  • HDPE
  • Aluminum Cans
  • Tin Cans
  • Printer's Waste
  • Other materials

Excel 2R63 Two Ram

 

Industrial solid waste bale

Industrial solid waste bale

Motor of baler

Control Panel for balers

Control Panel for balers

Solid baler frame

Solid baler frame